There are three ways to connect to the output end of the cam splitter:

1. The flanges are connected, and the output end face of the cam divider is a flange, which is connected to a rotary table. The machining screws in the center of the rotary table are connected to the cam divider. This connection method is the most common, and after assembly, it occupies a relatively small area and less space.

2. The shaft hole is connected through a key, and this connection method is also based on customer needs. It can install a small gear on the output shaft and then drive the large gear to operate.

3. Butting with flanges or couplings, coupling sleeves, etc. for shafts is relatively rare, but it also exists according to demand. Regardless of the connection method adopted for the output end of the cam splitter, the output end and the connecting piece must be firmly fixed and free from looseness, otherwise vibration or forward lag may occur. This not only easily reduces accuracy, but also damages the internal structure of the cam splitter, affecting its service life.